EVO E
Features
 |
ELSD (Earth Leakage Sensing Device)Cuts off electric supply in the event of any current leakage. |
|
Splash-Proof IP25 StandardProtection against water seeping into the heater’s internal mechanism. |
 |
|
 |
Electronic Stepless Temperature ControlShower temperature can be selected according to personal preference. |
|
Flow Switch SystemMinimum operating water flow of 3 litres / minute. |
 |
|
 |
Thermal Cut-OutPrevents scalding. |
Technical Specification
| Heater Rating | 3.5kW – 5.5kW, 220 – 240V~ 50Hz |
| Water Connection | Ø15.0mm (1/2”BSP) |
| Operating Condition | Open Outlet |
| Protection Against Electric Shock | Class 1 |
| Water Temperature Control | Electronics |
| Degree of Protection | IP25 |
| Minimum Flow Rate | 3 liter / minute |
| Heater Dimension | 230mm(W) x360mm(L) x 87.80mm(H) |
| Minimum Pressure | 0.2 bar/2.9 psi |
| Maximum Pressure | 3.8 bar/5.5 psi |
| Heater Nett Weight | 1.8kg |
*Specifications and products shown are correct at the time of printing and may subject to change without prior notice.
EVO EM
Features
Multipoint SystemA multipoint model can serve max 3 points (i.e. shower, bathtub and basin) within a bathroom. |
 |
|
| |
ELSD (Earth Leakage Sensing Device)Cuts off electric supply in the event of any current leakage. |
|
Splash-Proof IP25 StandardProtection against water seeping into the heater’s internal mechanism. |
|
|
|
Electronic Stepless Temperature ControlShower temperature can be selected according to personal preference. |
|
Flow Switch SystemMinimum operating water flow of 3 litres / minute. |
|
|
|
Thermal Cut-OutPrevents scalding. |
Technical Specification
| Heater Rating | 6.0kW – 8.0kW, 220 – 240V~ 50Hz |
| Water Connection | Ø15.0mm (1/2”BSP) |
| Operating Condition | Close Outlet |
| Protection Against Electric Shock | Class 1 |
| Water Temperature Control | Electronics |
| Degree of Protection | IP25 |
| Minimum Flow Rate | 3 liter / minute |
| Heater Dimension | 230mm(W) x360mm(L) x 87.80mm(H) |
| Minimum Pressure | 0.2 bar/2.9 psi |
| Maximum Pressure | 6.0 bar/87 psi |
| Heater Nett Weight | 1.6kg |
*Specifications and products shown are correct at the time of printing and may subject to change without prior notice.
