AZ-E
Features
 |
ELSD (Earth Leakage Sensing Device)Cuts off electric supply in the event of any current leakage. |
|
Splash-Proof IP25 StandardProtection against water seeping into the heater’s internal mechanism. |
 |
|
 |
Electronic Stepless Temperature ControlShower temperature can be selected according to personal preference. |
|
Flow Switch SystemMinimum operating water flow of 3 litres / minute. |
 |
|
 |
Thermal Cut-OutPrevents scalding. |
Technical Specification
Electrical Rating
| Heater Power Rating | 3.0 – 5.5kW 200-240V |
| Operating Condition | Open outlet |
| Protection Against Electric Shock | Class 1 |
| Water Temperature Control | Electronics |
| Degree of Protection | Class IP25 |
| Minimum Flow Rate | 2 litre / min (3 litre / min for 5.5kW) |
| Minimum Pressure | 20kPa (0.2 bar / 2.9 psi) |
| Maximum Pressure | 0.38Mpa (3.8 bar / 55 psi) |
| Heater Dimension | 195.5mm (W) x 330mm (L) x 95mm (H) |
| Nett Weight | 1.2 kg |
*Specifications and products shown are correct at the time of printing and may subject to change without prior notice.
AZ-EM
Features
Multipoint SystemA multipoint model can serve max 3 points (i.e. shower, bathtub and basin) within a bathroom. |
 |
|
| |
ELSD (Earth Leakage Sensing Device)Cuts off electric supply in the event of any current leakage. |
|
Splash-Proof IP25 StandardProtection against water seeping into the heater’s internal mechanism. |
|
|
|
Electronic Stepless Temperature ControlShower temperature can be selected according to personal preference. |
|
Flow Switch SystemMinimum operating water flow of 3 litres / minute. |
|
|
|
Thermal Cut-OutPrevents scalding. |
Technical Specification
Electrical Rating
| Heater Rating | 5.9 – 9.5kW 220-240V |
| Operating Condition | Close Outlet |
| Protection Against Electric Shock | Class 1 |
| Water Temperature Control | Electronics |
| Degree of Protection | IP25 |
| Minimum Flow Rate | 2 litre / min (3 litre / min for 5.5kW) |
| Heater Dimension | 195.5mm (W) x 330mm (L) x 95mm (H) |
| Minimum Pressure | 20kPa (0.2 bar / 2.9 psi) |
| Maximum Pressure | 0.6Mpa (6 bar) |
| Heater Nett Weight | 1.6kg |
*Specifications and products shown are correct at the time of printing and may subject to change without prior notice.
